Tripp Lite Wireless Access Point Enclosure with Lock - Surface-Mount, ABS Construction, 11 x 11 in.

Wall-Mount Enclosure Secures and Organizes Your Router/Modem or Wireless Access Point

Protect your indoor router/modem or Wi-Fi access point by installing it inside this SmartRack® Wireless Access Point Enclosure made from impact-resistant UL 94-HB Classified ABS plastic. It’s ideal for offices, dorms, hotels, classrooms, retail locations and other indoor areas where you need to keep Wi-Fi equipment secure, organized and out of the way.

Accommodates a Wide Range of Equipment, Including Cisco WAPs, up to 542 in.³

Though the EN1111 is designed specifically to protect Cisco Wi-Fi access points, it will also house most other enclosures up to 542 cubic inches (891 cubic centimeters). While rugged enough to keep your equipment safe inside, it’s also transparent to wireless signals, ensuring strong Wi-Fi coverage. Convenient knockout ports allow easy cable routing through the enclosure and reduce cable clutter.

Locks Securely to Help Prevent Damage, Tampering or Theft

This Wi-Fi access point enclosure swings away from the wall or ceiling on a sturdy hinge, allowing easy access to equipment and cabling during installation and maintenance. It locks securely with the included keys to protect its contents against theft, tampering, dust and other contaminants. Vents on each end allow cool air to flow freely through the enclosure to prevent equipment from overheating.

Easy to Mount with the Included Hardware

The EN1111 comes fully assembled and ready for horizontal or vertical mounting on a wall or ceiling with the included installation hardware. It is designed for Cisco WAPs, but the included universal T-bar bracket will accommodate a wide variety of equipment from other brands. Pre-cut openings allow for precise positioning over wall outlets.

Typical Application

● Protect a router/modem or wireless access point inside a classroom, office, hotel, store, dorm or other indoor space from damage, theft or tampering ● Designed for Cisco WAPs, but accommodates equipment from most vendors ● Rugged ABS plastic housing protects router/modem/WAP from theft or tampering ● Transparent to wireless signals, ensuring an optimum Wi-Fi signal in all directions ● Swings away from wall or ceiling on hinge to allow easy access to equipment and cabling ● Comes fully assembled and ready for wall- or ceiling-mounting using included hardware ● Wireless Access Point Enclosure with Lock, 11 x 11 in. ● (2) M6 screws, 1 in. ● (2) M6 trusshead screws, 0.25 in. ● (4) M6 flathead screws, 0.25 in. ● Cable tie ● (4) Nylon spacers ● T-bar bracket ● (2) Keys ● Installation guide