VELCRO® Brand Low Profile Industrial Strength Tape, 10ft x 1in Roll, White - For projects that need a powerful hold with a more finished look. Holds 1lb per square inch up to 10lbs.

General Information

Ultra-thin, high-performance, hook-and-loop fastener features 30 percent less height than VELCRO Brand's industrial-strength tape for a less visible contact point. Ultra-Mate Tape offers a water-resistant adhesive.

Packaged Quantity:1 / Roll
Product Type:Hook & Loop Fastener

Product Information

Reliability

Physical Characteristics

Miscellaneous

Shape:

Roll

Care and Application:

Instructions:

• Clean and dry surface before application
• Peel tape from fastener and press firmly into place
• Adhesive reaches maximum strength after 24 hours

Note: Not recommended for fabrics, dashboards, flexible vinyl or underwater use. Continued exposure to full sunlight can damage fastener.

Removal Instructions:

• Warm the tape (Hook or Loop) with a hair dryer. (Do not use a heat gun)
• Peel off the tape (Hook or Loop) the adhesive will remain on the substrate
• Warm the adhesive with the hair dryer (again, do not use a heat gun), peel off a piece and roll in a ball
• Cool the adhesive down. This may be done with ice in a plastic bag (only takes a few moments)
• Stick the ball on the adhesive which is on your substrate and pull it off
• Repeat step # 5 until the adhesive is completely removed from the substrate. This may take some time
• If any residue tackiness remains on the substrate you may now use a commercial remover like Goo Gone, acetone, WD-40, mineral spirits or citrus based cleaners

Weight Rating:

1 lbs per square inch up to 10 lbs

Functional Temperature Range:

0-120° F (-18-49° C)