Promotion On Hold Device

- Digital announcer/recorder
- Built in 2 watt amplifier to connect directly to speakers
- Designed to providemusic and promotion on hold by using playback in a continuous loop or alternating between promotions and an auxiliary music source at 2 second to 30 minute intervals
- Any number of multiple messages may be recorded
- Announcer comes with four professionally pre-recorded promotions on hold pacifier messages, as well as, power supply and cabling for an easy plug and play installation
- Output may be connected directly to loudspeakers with messages repeated in timed intervals or played at the push of a button for museum displays, information booths, point of interest locations, etc.
- 7.5 minutes of user recordable memory (select fromuser recorded messages or four pre-recorded on-hold pacifier messages)
- Three playback options:on demand, continuous, and timed intervals
- Non-volatile memory (no batteries required)
- Record from electret mic, carbon handset, tape, CD, PC sound card or any line level device
- 600 ohm audio output for high wattage amplifiers
- Multiple message capabilities (total number of messages only limited to maximum record time)
- AGC (Automatic Gain Control) for trouble free recording
- Auxiliary audio (MOH) input for between message background music
- Remote trigger input for on-demand playback from a remote contact closure
- Press and hold play mode
- Status LED forrecord and playback indication
- Master and auxiliary input volume controls
- I.O. communications port (allows only one DVA-2WA to announce at a time)
- Power: 120V AC/12V DC, 500mA adapter provided
- Dimensions: 133mm x 89mm x 44mm (5.25\" x 3.5\" x 1.75\")
- Shipping weight: 1.0 kg (2.2 lbs)
- Environmental: 0*C to 32*C (32*F to 90*F) with 5% to 95% non-condensing humidity
- Frequency response: 100-3.4KHz
- Sampling rate: 64K (equivalent)
- User message length: 7.5 minutes maximum
- Recording audio input level: 30mV
- 1.0V RMS (AGC range), 600 Ohm audio output level: 0.3V RMS maximum (across a 600 ohm load)
- Speaker output power: 2 watt peak
- Connections: (1) 6-position cage clamp terminal block, (3) 3mm (1/8\") audio jacks, (1) handset jack
- Pre-recorded pacifier message length: 30 seconds total
- Minimum speaker impedance: 2.66 Ohms: (3) 8-Ohm speakers