Back to Top
Cart Mobile
Tripp Lite Unmanaged Industrial Gigabit Fiber to Ethernet Media Converter, 10/100/1000 Mbps, RJ45/SFP, -40° to 75°C, DC Power
MPN
N785-I01-SFP-DU
UPC
037332268594
About this item
Unmanaged Industrial Gigabit Fiber to Ethernet Media Converter, 10/100/1000 Mbps, RJ45/SFP, -40° to 75°C, DC Power
Customize a Network Extension over Fiber Optic Cable
This unmanaged media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling’s 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential information, including network speed, connection status and unit power. The included 12–57VDC terminal block provides primary and secondary power inputs. You can also power the media converter with a user-supplied 12VDC power supply.
Protective Metal Housing Built to Withstand a Variety of Hazards
The IP30 industrial-grade aluminum case is protected from entry by tools, wires and other solid objects greater than 2.5 millimeters in diameter. It can also operate in extreme temperatures ranging from -40 to 75 degrees Celsius (-40 to 167 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting.
TAA-Compliant for GSA Schedule Purchases
The N785-I01-SFP-DU is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
This unmanaged media converter works with a variety of SFP transceivers to convert a copper Gigabit Ethernet signal to fiber optic and extend it to a second network device. The customizable SFP port supports both singlemode and multimode transceivers, allowing your network connection to reach hubs, switches and other devices located farther away than copper cabling’s 100-meter limit. Auto-negotiation and automatic MDI/MDI-X configuration seamlessly connect devices without crossover cabling.
LEDs Indicate Installation Performance and Diagnostic Functions
Easy-to-read LEDs on the side of the unit indicate essential information, including network speed, connection status and unit power. The included 12–57VDC terminal block provides primary and secondary power inputs. You can also power the media converter with a user-supplied 12VDC power supply.
Protective Metal Housing Built to Withstand a Variety of Hazards
The IP30 industrial-grade aluminum case is protected from entry by tools, wires and other solid objects greater than 2.5 millimeters in diameter. It can also operate in extreme temperatures ranging from -40 to 75 degrees Celsius (-40 to 167 degrees Fahrenheit). It is protected from electrostatic discharge (ESD), radio frequency interference (RFI) and power surges. Hardware is included for DIN mounting.
TAA-Compliant for GSA Schedule Purchases
The N785-I01-SFP-DU is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Specifications
Networking
| Data transfer rate (max) | 1000 Mbit/s |
| Networking standards | IEEE 802.3ab, IEEE 802.3u, IEEE 802.3z |
| Ethernet interface type | Fast Ethernet, Gigabit Ethernet |
| Ethernet LAN data rates | 10,100,1000 Mbit/s |
| Auto MDI/MDI-X | |
| Auto-negotiation | |
| Cable types supported | Cat5, Cat5e, Cat6, Cat6a, Fiber |
Ports & interfaces
| Connectivity technology | Wired |
| Ethernet LAN (RJ-45) ports | 1 |
| Fiber ports quantity | 1 |
| Fiber optic connector | SFP |
| Terminal block included | |
| DC-in jack |
Performance
| Wavelength-division multiplexing (WDM) | |
| Fiber mode structure | Multi-mode, Single-mode |
Design
| Internal | |
| LED indicators | Y |
| Country of origin | Taiwan |
| DIN rail mounting | |
| Product colour | Black |
| Housing material | Metal |
| Certification | CE, FCC, RoHS |
Power
| Input voltage | 12 - 57 V |
| Power consumption (typical) | 6 W |
Technical details
| Master carton GTIN (EAN/UPC) | 10037332268591 |
Weight & dimensions
| Width | 42.5 mm (1.66 ") |
| Depth | 60 mm (2.34 ") |
| Height | 50 mm (1.95 ") |
| Weight | 190 g (0.42 lbs) |
Operational conditions
| Operating temperature (T-T) | -40 - 75 °C |
| Storage temperature (T-T) | -40 - 85 °C |
| Operating relative humidity (H-H) | 10 - 95 % |
| Storage relative humidity (H-H) | 5 - 95 % |
Packaging data
| Package width | 237 mm |
| Package depth | 128 mm |
| Package height | 62 mm |
| Package weight | 300 g |
| Package type | Box |
Logistics data
| Master carton width | 272 mm |
| Master carton length | 492 mm |
| Master carton height | 343.9 mm |
| Master carton weight | 7000 g |
| Quantity per master carton | 20 pc(s) |
Note:
Please be aware that availability, promotions, and descriptions may change without notice, but you can feel confident knowing that the price for
N785-I01-SFP-DU by Tripp Lite
you see now, is the price you pay. If you have any questions, our customer care team is available to assist you.
Similar Products
View More
Trending Today
