Tripp Lite DisplayPort to HDMI over Cat5/6 Active Extender Kit, Pigtail-Style Transmitter/Receiver, Video/Audio, 1080/60p, Up to 46 m

The B150-1A1-HDMI DisplayPort to HDMI over Cat5/Cat6 Active Extender Kit includes a transmitter unit and a receiver unit that work in tandem to convert a DisplayPort audio/video signal to HDMI and then extend it to a projector, monitor or television up to 45 m away. The kit is ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than convention cables allow.
One Cat5e/6 cable connects the transmitter and receiver (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series). A built-in DisplayPort cable connects the transmitter to the source, while a built-in HDMI cable connects the receiver to the display. Included USB Micro-B cables connect the transmitter to a USB port on the DisplayPort computer or a USB wall charger (such as Tripp Lite’s U280-002-W12), and connect the receiver to a USB port on the HDMI display or a USB wall charger. No external power supplies are needed.
The B150-1A1-HDMI can extend a high-definition 1080i (60 Hz) signal up to 150 feet and a 1080p (60 Hz) signal up to 38 m. In addition to crystal-clear video, including 24-bit True Color (8 bits per channel), the kit delivers full, rich stereo. Green and orange LEDs on both units indicate when they are receiving power from the USB Micro-B cables and sharing a signal. Easy to set up with no software or drivers to install. Works with all operating systems.

Converts DisplayPort Signal to HDMI, Extends It Up to 45.72 m

● Ideal for digital signs, trade shows, presentations, classrooms, churches, retail settings and other applications where the video source is located farther than convention cables allow
● Extends a high-definition 1080i (60 Hz) signal up to 46 m and a 1080p (60 Hz) signal up to 38 m
● Transmitter and receiver connect with one Cat5e/6 cable (for best results, use 24 AWG solid-wire Cat5e/6 cable, such as Tripp Lite’s N202-Series)
● Supports 24-bit True Color (8 bits per channel) and stereo audio
● HDCP 1.3 compliant

Easy to Set Up and Use

● Plug-and-play engineering—no software or drivers to download and install
● Works with all operating systems
● Built-in cables connect transmitter to DisplayPort source and receiver to HDMI display
● Included USB Micro-B cables supply external power to the units
● LEDs indicate when the units are receiving power and sharing a signal
● Extends 1080i signal up to 45 m, 1080p signal up to 38 m
● Supports 24-bit True Color (8 bits per channel) and stereo audio
● Included USB Micro-B cables supply power to both units
● Works with all operating systems
● Plug and play—no software or drivers to install
● HDCP 1.3 compliant

System Requirements

● Computer with DisplayPort output port*
● Display with HDMI input port
* DisplayPort source must be enabled to support audio in order for kit to extend audio signals"

Package Includes

● Transmitter unit
● Receiver unit
● (2) USB Micro-B cables, 0.91 m
● Owner’s Manual
Batteries not Required to Operate