SAMA IM02 Tempered Glass Steel Micro ATX Case

Even-big boy 3090s-can fit in here.

SAMA IM02 is a tiny PC case that fits slightly over 21 liters it has four reattachable PCIe brackets that support GPUs up to 335 millimeters in length.

Additionally, you have two vertical pcie brackets.

IM2 generally configures the GPU to be a maximum of 245 millimeters long when using atx, but only if they are extremely short and no cables are in the way.

The same limitation applies to the psu because you can go with adx as well as adx power supplies-already pre-installed.

There are two installation options: Micro-ATX installation and ITX installation.

It supports Micro-ATX motherboards, which provide greater compatibility and performance by incorporating internal storage.

It can also accommodate ITX motherboards, which have low power consumption and generate less heat.

Depending on the setup, users can install an SFX or an ATX power supply.

With 4+2 PCIE slots, the GPU can be installed horizontally or vertically.

SAMA IM02 can fit a maximum GPU length of 245mm and a maximum CPU cooler height of 88mm with vertical GPU installation and an ATX power supply. It can suit a maximum GPU length of 335mm and a maximum CPU cooler height of 155mm with horizontal GPU installation.

Ventilation holes are located on the top, bottom, side cover, and side of the front panel to quickly dissipate interior heat.

IM02 offers 7 fan space capabilities to maximize your system's ventilation.

You can also accommodate up to 5 x 3.5" HDDs and 7 x 2.5" SSDs. 2 x USB 3.0 to suit the high transmission speed demand.

Inside of sama im02 we have three fan slash hard drive brackets; the top one, the bottom one, and the central-one, each of them being removable with a couple of screws.

Now, on top of each of those brackets, you can mount either hard drives or fans.

How to install the radiator on the bottom?

This will kill your pump

How to install a radiator in the worst possible position which will definitely cause harm to your pump or thermals within a short period of time.

We believe that this case is not built-for water cording - sure you can cram a radiator in there-but they pretty much jumped over this topic in the manual.

The only way that makes mounting a radiator that thick possible is to use the vertical GPU option while doing it in a reverse build.

Overall SAMA IM02 have a solid build quality. Everything in here is made out of thick metal—no cheap plastics—almost everything closes down with a clicking system.

It has an easy-to-remove structure that includes a front, top, and side panel with a unique buckle design.

Each side panel can be quickly removed and closed without the use of complicated screws. It provides a stress-free installation experience.

There is one installation option, so-just stick with air only.