Tripp Lite 600VA 360W 120V Pure Sine Wave Gaming UPS Battery Backup - LCD, AVR, RGB LEDs, USB Charging, Power Saving

SKU

14_SMART600PSGLCD_1

Be the first to review this product

$229.00

Visit our Tripp Lite Store

MPN

SMART600PSGLCD

UPC

037332253743

Purpose-Built Gaming UPS Protects Your Equipment and Provides Pure Sine Wave Output

This 120V line-interactive UPS provides pure sine wave output in both AC and battery backup modes to keep your gaming PC or gaming console reliably powered. It also protects connected equipment against blackouts, brownouts, surges and line noise that can damage valuable electronics or destroy data. The SMART600PSGLCD is ideal protection for high-end gaming systems powered by Active PFC power supplies, as well as routers, modems and other network equipment in your computer room, game room or home theater.

Reliable Battery Backup Keeps You Playing Through Power Outages

The field-replaceable, hot-swappable internal battery keeps your gaming rig fully operational without interruption during power failures and other severe power conditions. With a typical 250W gaming system connected, the SMART600PSGLCD provides 7.5 minutes of independent runtime. This allows you to play through short power failures, avoid streaming interruptions and safely save your game and shut down your system in case of a prolonged blackout.

8 NEMA 5-15R Outlets Protect Your Connected Components and Monitor Load Conditions

Three 5-15R energy-saving outlets provide battery backup and network-grade surge protection for your gaming rig and connected desktop and network components. Four outlets are surge-only to connect peripherals not requiring battery backup, such as a printer or desk lamp. One battery- and surge-supported master outlet controls the energy-saving outlets and reports the wattage drawn by the PC or other connected device. If the device connected to the master outlet shuts down or enters standby, the three energy-saving outlets also turn off.

Dynamic Lighting Adds Excitement to Your Gaming Experience

The SMART600PSGLCD is purpose-built for gaming, including RGB color LEDs you can program yourself. Controllable via the detachable front-panel LCD or Tripp Lite’s free downloadable software utility (https://www.tripplite.com/products/management-utilities), two separate LED banks come with seven preset lighting modes and 16.7 million possible color combinations. You can program a variety of color and motion effects or configure the lights to respond to power consumption changes on the master outlet.

Detachable Wireless LCD Reports Real-Time Status

The front-panel LCD displays a wide range of UPS and power conditions, including operating mode, voltage, frequency, battery level and load level. It detaches from the UPS system and operates wirelessly up to 20 feet (6 meters) away for as many as 12 hours.

Automatic Voltage Regulation (AVR) Corrects Low- and High-Voltage Conditions

AVR protects your equipment from incremental hardware damage, data loss and performance problems caused by brownouts. The SMART600PSGLCD maintains regulated 120V nominal output during brownouts as low as 97V and overvoltages up to 145V, while keeping the battery fully charged and ready to take over in case of power failure.

Premium Protection from EMI/RFI Line Noise Helps Your Equipment Perform Better

This UPS system filters out disruptive electromagnetic and radio frequency interference that can inflict hardware damage or data loss. This EMI/RFI filtering also helps your connected components perform better and last longer.

Can Safely Shut Down Automatically Even When You Aren’t Around

By downloading and installing Tripp Lite’s free PowerAlert® software on your computer and connecting it to the UPS system with the included USB cable, you can set up safe unattended shutdown in the event of a prolonged power failure when you aren’t around. Note: Installing PowerAlert provides enhanced functionality, but is not required.

Built-In USB Charging Ports Keep Your Mobile Devices at Full Capacity

Two USB ports, one USB-A and one USB-C, share 3A of maximum current for charging your smartphone, tablet and other mobile devices. These USB charging ports are available for use when the UPS system is turned on and receiving AC power.

Specifications

Power

Output power capacity	0.6 VA
Output power	360 W
Input operation voltage (min)	120 V
Input operation voltage (max)	120 V
Surge energy rating	316 J
Efficiency (On-line mode)	96 %

Ports & interfaces

AC outlet types	NEMA 5–15R
Power plug	NEMA 5-15P
Cable length	1.5 m
AC outlets quantity	8 AC outlet(s)

Battery

Battery technology	Sealed Lead Acid (VRLA)
Typical backup time at half load	9 min
Typical backup time at full load	2.5 min
Cold start

Design

Housing material	Acrylonitrile butadiene styrene (ABS)
Form factor	Tower
Product colour	Black

Performance

UPS topology	Line-Interactive
Number of input phases	1
EMI/RFI noise filtering
Surge protection features	Digital Subscriber Line (DSL), Network
Power protection features	Over voltage, Under voltage
Waveform	Sine
Automatic Voltage Regulation (AVR)
Audible alarm(s)
Audible alarm modes	Alarm when on battery, Battery replacement, Fault, Low battery alarm

Features

Input frequency	50/60 Hz
Country of origin	Vietnam

Cooling

Built-in fan
Cooling type	Active

Technical details

Output frequency

50/60 Hz

Operational conditions

Operating temperature (T-T)	0 - 40 °C
Storage temperature (T-T)	-15 - 50 °C
Operating relative humidity (H-H)	0 - 90 %

Weight & dimensions

Width	99 mm (3.86 ")
Depth	308 mm (12.01 ")
Height	280 mm (10.92 ")
Weight	7480 g (16.49 lbs)
Package width	184.9 mm
Package depth	374.9 mm
Package height	375.9 mm
Package weight	7940 g

Packaging content

Manual
Cables included	USB cable

Other features

	LCD
	AC
	8504.40.8500

Note: Please be aware that availability, promotions, and descriptions may change without notice, but you can feel confident knowing that the price for SMART600PSGLCD by Tripp Lite you see now, is the price you pay. If you have any questions, our customer care team is available to assist you.