Back to Top
Cart Mobile
Tripp Lite PDUMH20ATS power distribution unit (PDU) 16 AC outlet(s) 1U
Eligible for Free Shipping & Free Returns
MPN
PDUMH20ATS
UPC
037332261373
About this item
1.92kW 120V Single-Phase ATS/Metered PDU - 16 5-15/20R Outlets, Dual L5-20P/5-20P Inputs, 12 ft. Cords, 1U, TAA
Single-Phase 20A ATS PDU Distributes and Monitors Network-Grade Power in Real Time
This metered PDU provides real-time local reporting of the total load level via its built-in digital current metering. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMH20ATS features 16 NEMA 5-15/20R 120V outlets for connecting equipment. Dual 12-foot (3.7-meter) power cords with NEMA L5-20P inputs (two 5-20P adapters are included) connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources.
Switches from Primary to Secondary Power Source in Milliseconds
Automatic transfer switching (ATS) allows the PDU to switch to the secondary source within 2–7 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source.
Digital Load Meter Helps Prevent Potentially Expensive Overloads
A digital ammeter reports the total load for all connected equipment. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low.
Mounts into 1U of Rack Space or on a Wall
Use the included mounting hardware to install the all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter.
TAA-Compliant for GSA Schedule Purchases
The PDUMH20ATS is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
This metered PDU provides real-time local reporting of the total load level via its built-in digital current metering. Ideal for network IT applications, small computer rooms and other equipment rack applications, the PDUMH20ATS features 16 NEMA 5-15/20R 120V outlets for connecting equipment. Dual 12-foot (3.7-meter) power cords with NEMA L5-20P inputs (two 5-20P adapters are included) connect to separate primary and secondary mains circuits, backup generators, UPS systems or utility power grids, including out-of-phase sources.
Switches from Primary to Secondary Power Source in Milliseconds
Automatic transfer switching (ATS) allows the PDU to switch to the secondary source within 2–7 milliseconds, should the primary source fail or become unstable, to ensure your connected equipment operates without interruption. An on-board ATS processor constantly evaluates the power quality of both input sources. It prevents switching if the secondary source is unavailable or of lower quality than the primary source.
Digital Load Meter Helps Prevent Potentially Expensive Overloads
A digital ammeter reports the total load for all connected equipment. Monitoring amperage helps ensure load levels remain well below maximum capacity with no danger of overload that could lead to costly downtime or damaged equipment. Maintaining proper load levels, even while adding new equipment, can keep your TCO (total cost of ownership) low.
Mounts into 1U of Rack Space or on a Wall
Use the included mounting hardware to install the all-metal housing into 1U of space in an EIA-standard 19-inch rack. You may also use the mounting brackets to secure the PDU to a wall or under a counter.
TAA-Compliant for GSA Schedule Purchases
The PDUMH20ATS is compliant with the Federal Trade Agreements Act (TAA), which makes it eligible for GSA (General Services Administration) Schedule and other federal procurement contracts.
Specifications
Design
| PDU types | Metered, Switched |
| Type | Single-phase |
| Rack capacity | 1U |
| Mounting | Horizontal |
| Housing material | Metal |
| Product colour | Black |
Ports & interfaces
| AC outlets quantity | 16 AC outlet(s) |
| Power plug | NEMA L5-20P |
| AC outlet types | NEMA 5–15R, NEMA 5–20R |
| Serial ports quantity | 1 |
Ergonomics
| Display | LCD |
| LED indicators | Y |
| Cable length | 3.66 m |
Operational conditions
| Storage temperature (T-T) | -30 - 50 °C |
| Operating relative humidity (H-H) | 5 - 95 % |
| Operating altitude | 0 - 3000 m |
Packaging content
| Cables included | AC |
| Manual |
Power
| Nominal input voltage | 120 V |
| AC input frequency | 50/60 Hz |
| Maximum current | 20 A |
| Nominal output voltage | 100 - 127 V |
| Maximum power | 2030 W |
Weight & dimensions
| Width | 444.5 mm (17.34 ") |
| Depth | 368.3 mm (14.36 ") |
| Height | 44.4 mm (1.73 ") |
| Weight | 5530 g (12.19 lbs) |
| Package weight | 9390 g |
| Package width | 591.8 mm |
| Package depth | 510.5 mm |
| Package height | 137.2 mm |
Logistics data
| Master carton width | 591.8 mm |
| Master carton length | 510.5 mm |
| Master carton height | 137.2 mm |
| Master carton weight | 9390 g |
| Quantity per master carton | 1 pc(s) |
Other features
| RoHS | |
| Y | |
| Taiwan | |
| Y |
Note:
Please be aware that availability, promotions, and descriptions may change without notice, but you can feel confident knowing that the price for
PDUMH20ATS by Tripp Lite
you see now, is the price you pay. If you have any questions, our customer care team is available to assist you.
Similar Products
View More
Trending Today
