iPC Store

Tenda TEG5328P-24-410W Managed L3 Gigabit Ethernet (10/100/1000) PoE 1U

Out of stock
SKU
19_TEG5328P-24-410W_1
$349.99
MPN
TEG5328P
UPC
885397272601

About this item
24 x 10/100/L3 Managed PoE Switch, 1000 Base-T Ethernet ports, 4 x 1000 Base-X SFP ports, 1 x Console port, 440 x 284 x 44 mm

TEG5328P-24-410W is a Tenda Layer-3 managed PoE switch.

To meet the demand of high-performance access, the switch provides 24 10/100/1000 Mbps Base-T Ethernet ports and 4 separate 1000 Mbps Base-X SFP ports, and a PoE power of up to 370 W.

With an innovative hardware structure and software platform, it features a powerful processing capacity and complete security protection mechanism, making management and maintenance easy and simple, fully meeting the demands of high-density user access and high-performance aggregation, ideal for the aggregation layer or access layer of such medium to large networks as enterprises and campuses.

L3 Managed PoE Switch Layer-3 Routing Engine,High-Efficiency Fast Forwarding

Supports Layer 3 static routing protocols, supports Layer 3 forwarding of up to 400+ terminals, easily meets Layer 3 routing andforwarding across network segments, and truly achieves Layer 2 network isolation and Layer 3 network interworking.

Comparedwith using a Layer 2 switch for transmission, there is no need to go through a router, and the forwarding speed is faster!

370W Smart PoE Power Supply, 2 Times Load Capacity

Using a new 410W built-in PoE power, the number of AF / AT full-supply loads is twice than the ordinary low-power PoE switches!

At the same time, the built-in PSE chip with intelligent power management function can monitor the temperature of the chip and customize the PoE power supply based on the time period.

The device will automatically turn on / off the PoE function during working hours and idle time to minimize energy consumption and extend the service life of the device.

Flexible QoS, Precise Traffic Control

The TEG5328P-24-410W supports three QoS scheduling modes (SP, SWRR, WRR) for more accurate traffic control.

After the QoS function is enabled, the traffic in the network will be precisely controlled according to the priority of the label.

It will prioritize important traffic and reduce the proportion of data flows that occupy a large amount of insignificant traffic in the condition of limited bandwidth,in order to better meet the current transmission needs.

Supports Layer 2 And Layer 3 ACL,For More Secure Access

Support strict access control based on MAC address or IP address, which can filter the corresponding data packets to enhance user network security.

It can be used for network deployment of enterprise medical and other units.

Multiple Attack Defenses, Multiple Security Blessings

Support IP / MAC / ARP filtering / DoS attack protection, enable attack protection according to networking requirements, bring multiple layers of protection to user network security, and ensure network stability and failure-free.

Specifications
Management features
Switch type Managed
Switch layer L3
Quality of Service (QoS) support
ARP inspection
Web-based management
Ports & interfaces
Basic switching RJ-45 Ethernet ports quantity 24
Basic switching RJ-45 Ethernet ports type Gigabit Ethernet (10/100/1000)
Installed SFP modules quantity 4
Console port RJ-45
Networking
Networking standards IEEE 802.1D, IEEE 802.1Q, IEEE 802.1p, IEEE 802.1s, IEEE 802.1w, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
IP routing
Port mirroring
10G support
Data transmission
Switching capacity 56 Gbit/s
Forwarding rate 41.7 Mpps
MAC address table 16000 entries
Jumbo frames support
Jumbo frames 10000
Virtual LAN features
VLAN support
Multicast features
Multicast support
Security
DHCP features DHCP relay, DHCP snooping
IGMP snooping
Security algorithms 802.1x RADIUS
MAC address filtering
Access Control List (ACL)
Protocols
Management protocols SNMP V1/V2/V3, Telnet, Console
Multicast protocols IGMP Snooping V1/V2/V3
Design
Rack mounting
Form factor 1U
Product colour Grey
Number of fans 2 fan(s)
Wall mountable
LED indicators Activity, Link, PoE, Power, System
Certification CCC, FCC, CE, RoHS
Power
Power connector AC-in jack
Power consumption (max) 432 W
Power supply included
AC input voltage 100 - 240 V
AC input frequency 50/60 Hz
Power over Ethernet (PoE)
Power over Ethernet (PoE)
Power over Ethernet (PoE) ports quantity 24
Power over Ethernet (PoE) power per port 30 W
Total Power over Ethernet (PoE) budget 370 W
Operational conditions
Operating temperature (T-T) 0 - 45 °C
Storage temperature (T-T) -40 - 70 °C
Operating relative humidity (H-H) 10 - 90 %
Storage relative humidity (H-H) 5 - 90 %
Weight & dimensions
Width 440 mm (17.16 ")
Depth 284 mm (11.08 ")
Height 44 mm (1.72 ")
Other features
Ethernet LAN data rates 10,100,1000 Mbit/s
Note: Please be aware that availability, promotions, and descriptions may change without notice, but you can feel confident knowing that the price for TEG5328P by Tenda you see now, is the price you pay. If you have any questions, our customer care team is available to assist you.

Similar Products

View More
Back to Top
Live Chat Button Live Chat Button