Tripp Lite B004-DP2UA2-K KVM switch

The desktop B004-DP2UA2-K 2-Port DisplayPort 1.2 KVM Switch lets you access, control, boot and reboot two
4K DisplayPort computers using one DisplayPort monitor, keyboard and mouse. Switching between computers is
quick and simple using a connected remote port selector, keyboard hotkeys or mouse scroll wheel. The
B004-DP2UA2-K supports Multi-Stream Transport (MST), so you can use multiple monitors via one DisplayPort
connector.
By adding a powered USB 2.0 hub (sold separately) to the switch, you increase functionality by allowing USB
peripherals—such as printers, hard drives, scanners, webcams and thumb drives—to be shared between
computers. You can also plug microphones and speakers into the 3.5 mm mini-stereo jacks. Because audio and
the B004-DP2UA2-K can be switched independently of each other, you can access one computer while listening
to audio on the other.
All necessary cables are included. The B004-DP2UA2-K supports Ultra High Definition (UHD) video resolutions
up to 3840 x 2160 (4K x 2K) at 60 Hz, 2.1-channel surround sound, HD Audio, EDID and HDCP. All connected
computers receive the console monitor’s EDID information to ensure top video quality and prevent any delay or
change in video resolution when switching computers.
The B004-DP2UA2-K is easy to set up with no software or drivers to install. It supports Windows, Mac, Linux and
Sun. It also supports DisplayPort Dual Mode (DP++) for directly outputting single-link DVI or HDMI signals via
adapter.
Control two DisplayPort 1.2 computers using one DisplayPort monitor, keyboard and mouse. Connect a USB 2.0 hub (sold separately) to share USB peripherals, such as printers and hard drives, between computers.
- Supports video resolutions up to 3840 x 2160 (4K x 2K) @ 60 Hz
- Switch between computers via remote selector, hotkeys or mouse
- Supports DisplayPort Dual Mode (DP++), EDID and HDCP
- Upgradable firmware
- Compatible with Windows, Mac, Linux and Sun