APC Smart-UPS 3000VA RM 2U LCD 208V 3 kVA 2700 W 2 AC outlet(s)

Intuitive LCD interface

nProvides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.n

Predictive replace battery date

nDynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.n

Green mode

nPatent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.n

Energy meter

nProvides actual kilowatt hours of usage for energy conscious users.n

Outlet group control

nTurn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups).n

Sequenced shutdown and restart

nConfigure select outlet groups to shut down and turn on in a pre-determined order (for UPSs with switched outlet groups).n

Pure sine wave output on battery

nSimulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.n

Single switched outlet group

nSingle outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.n

Wide input voltage range

nDesigned for harsh electrical environments to save battery life.n

StruxureWare

nCentral compatible Enables centralized management via StruxureWare Central.n

Battery failure notification

nProvides early-warning fault analysis on batteries enabling timely preventive maintenancen

High online efficiency

nReduces utlility costs, generates less heat.n

LED Indicators

nProvide easy-to-read status of the unit and utility power conditions.n

Cold-start capable

nProvides temporary battery power when the utility power is out.n

Hot-swappable batteries

nEnsures clean, uninterrupted power to protected equipment while batteries are being replacedn

Disconnected battery notification

nWarns when a battery is not available to provide backup power.n

Automatic self-test

nPeriodic battery self-test ensures early detection of a battery that needs to be replaced.nAutomatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power.n

Adjustable voltage-transfer points

nMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.n

Adjustable voltage sensitivity

nProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.n

Audible alarms

nProvides notification of changing utility power and UPS conditionsn

User-replaceable batteries

nIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)n

USB connectivity

nProvides management of the UPS via a USB port (not available on all models).n

Serial Connectivity

nProvides management of the UPS via a serial port.n

Temperature-compensated battery charging

nProlongs battery life by regulating the charge voltage according to battery temperature.n

Boost and Trim Automatic

nVoltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery.n

Intelligent battery management

nMaximizes battery performance, life, and reliability through intelligent, precision charging.n

Safety-agency approved

nEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.n

Network manageable

nProvides remote management of the UPS over the network.n

Frequency and voltage regulation

nGives higher application availability by correcting poor frequency and voltage conditions without using the battery.n

Predicitive failure notification

nProvides early-warning fault analysis ensuring proactive component replacement.n

Boost and Trim

nAutomatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery.n

Intelligent battery management

nMaximizes battery performance, life, and reliability through intelligent, precision charging.n

Power conditioning

nProtects connected loads from surges, spikes, lightning, and other power disturbances.n

Temperature-compensated battery charging

nProlongs battery life by regulating the charge voltage according to battery temperature.n

Automatic restart of loads after UPS shutdown

nAutomatically starts up the connected equipment upon the return of utility power.n

Automatic self-test

nPeriodic battery self-test ensures early detection of a battery that needs to be replaced.n

Disconnected battery notification

nWarns when a battery is not available to provide backup power.

Network manageable

nProvides remote management of the UPS over the network.n

Audible alarms

nActively let you know if the unit is on battery, if the battery is low or if there is an overload condition.n

LED status indicators

nQuickly understand unit and power status with visual indicators.n

Serial Connectivity

nProvides management of the UPS via a serial port.n

USB connectivity

nProvides management of the UPS via a USB port (not available on all models).n

Disconnected battery notification

nWarns when a battery is not available to provide backup power.

User-replaceable batteries

nIncreases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to RepairHot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replacedn

Predictive failure notification

nProvides early-warning fault analysis ensuring proactive component replacement.n

Resettable circuit breakers

nEnables a quick recovery from overload events.n

Battery failure notification

nProvides early-warning fault analysis on batteries enabling timely preventive maintenance

Adjustable voltage-transfer points

nMaximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.n

Adjustable voltage sensitivity

nProvides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.

Safety-agency approved

nEnsures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.